Effects of water molecules on the formation of transfer films and the occurrence of superlow friction

The establishment of superlow friction in moist air is very important for the engineering application of hydrogenated diamond-like carbon (H-DLC) films. Nevertheless, water molecules in the surrounding atmosphere always result in the failure of the near-frictionless state. This work aims to explore the effects of water molecules in the environment and the material of the counterparts on the tribological performance of a composite structure prepared by depositing MoS₂ on a H-DLC film. The results indicated that the existence of water molecules in the atmosphere is beneficial for achieving stable superlubricity for the material system because it helps retain the in-situ formed MoS₂ transfer film on the counterpart. In the presence of water molecules, the wear interface was replaced by a robust and incommensurate MoS₂ tribolayer/H-DLC sliding interface, which was responsible for the superlow friction achieved in this work. The results also revealed that the ZrO₂ counterpart was capable of retaining the as-formed MoS₂ transfer film and establishing long-lasting superlow friction even in dry air. The mechanisms behind this phenomenon are also discussed in this paper.     

Impact of precursor preparation on density of gadolinium iron garnets synthesized via reactive sintering

Gadolinium iron garnet was obtained from two different precursors, homogenized in isopropyl alcohol and in an aqueous environment with a fixed pH. In the first case, it was a mixture of goethite (FeO(OH)) and gadolinium oxide (Gd₂O₃); in the second, a mixture of GdIP (GdFeO₃) and α-Fe₂O₃. Conditions of homogenization in the aqueous environment were selected based on the zeta (ξ) potential measurements as the function of pH. DSC measurements of the output powder mixtures allowed the identification of the effects observed during the temperature rise. In the case of the material obtained from a mixture of goethite (FeO(OH)) and gadolinium oxide, with the increasing temperature, we observe three effects, the first of which corresponds to the phase transformation of goethite into α-Fe₂O₃, the second corresponds to the reaction of gadolinium iron perovskite (GdIP) formation, and the third to the reaction in which a gadolinium iron garnet (GdIG) is formed. However, in the case of heat treatment of the mixture of GdIP and α-Fe₂O₃, we only observe the effect responsible for a solid state reaction leading to the formation of gadolinium iron garnet. Dilatometric measurements allowed to determine the changes in linear dimensions at various stages of reaction sintering. The resulting materials were sintered at temperatures of 1200, 1300, and 1400 °C. In the case of the material obtained from a mixture of perovskite and iron (III) oxide, already at the temperature of 1300 °C, a density has been obtained at around 95% of the theoretical density, and the temperature of 1400 °C allowed achieving a density of 97% of the theoretical density. Whereas, for the material obtained from a mixture of goethite (FeO(OH)) and gadolinium oxide, a density above 95% of theoretical density was achieved only at 1400 °C.     

Removal of copper(II) from aqueous solution using chemically modified fruit peels as efficient low-cost biosorbents

Fruit peels, which are common agricultural byproducts, have been extensively used as abandoned or low-cost biosorbents to remove heavy metals. In this study, dragon fruit peel (DFP), rambutan peel (RP), and passion fruit peel (PFP) were used to remove Cu(II) ions from an aqueous solution. Concentrations of the adsorbed metal ions were determined using the atomic absorption spectroscopic method. Adsorption experiments were performed with different adsorbent dosages, pH values, contact times, and initial copper concentrations. The optimum set of conditions for biosorption of Cu(II) ions was found to be an adsorbent dosage of 0.25 g, a contact time of 180 min, an initial concentration of 100 mg/L, a pH value of 4 for RP and PFP, and a pH value of 5 for DFP. The adsorption conformed with the pseudo-second-order kinetic model. The adsorption data were consistent with the Langmuir and Freundlich isotherm models, but the best fit was with the Langmuir model. The Langmuir monolayer adsorption capacity values of DFP, RP, and PFP were calculated to be 92.593, 192.308, and 121.951 mg/g, respectively. RP showed a higher adsorption capacity of Cu(II) ions than PFP and DFP for all parameters. The results indicate that these biosorbents might be used to effectively adsorb Cu(II) ions from wastewater treatment plants.     

Poly(2,5-Dihydroxy-1,4-Benzoquinonyl Sulfide) As an Efficient Cathode for High-Performance Aqueous Zinc–Organic Batteries

Aqueous rechargeable zinc-ion batteries (ZIBs) have attracted considerable attention as a promising candidate for low-cost and high-safety electrochemical energy storage. However, the advancement of ZIBs is strongly hindered by the sluggish ionic diffusion and structural instability of inorganic metal oxide cathode materials during the Zn²⁺ insertion/extraction. To address these issues, a new organic host material, poly(2,5-dihydroxy-1,4-benzoquinonyl sulfide) (PDBS), has been designed and applied for zinc ion storage due to its elastic structural factors (tunable space and soft lattice). The aqueous Zn-organic batteries based on the PDBS cathode show outstanding cycling stability and rate capability. The coordination moieties (O and S) display the strong electron donor character during the discharging process and can act as the coordination arms to host Zn²⁺. Also, under the electrochemical environment, the malleable polymer structure of PDBS permits the rotation and bending of polymer chains to facilitate the insertion/extraction of Zn²⁺, manifesting the superiority and uniqueness of organic electrode materials in the polyvalent cation storage. Finally, quasi-solid-state batteries based on aqueous gel electrolyte demonstrate highly stable capacity under different bending conditions.     

Piezoelectricity of the Transmembrane Protein ba3 Cytochrome c Oxidase

Controlling the electromechanical response of piezoelectric biological structures including tissues, peptides, and amino acids provides new applications for biocompatible, sustainable materials in electronics and medicine. Here, the piezoelectric effect is revealed in another class of biological materials, with robust longitudinal and shear piezoelectricity measured in single crystals of the transmembrane protein ba₃ cytochrome c oxidase from Thermus thermophilus. The experimental findings from piezoresponse force microscopy are substantiated using a range of control measurements and molecular models. The observed longitudinal and shear piezoelectric responses of ≈ 2 and 8 pm V⁻¹, respectively, are comparable to or exceed the performance of commonly used inorganic piezoelectric materials including quartz, aluminum nitride, and zinc oxide. This suggests that transmembrane proteins may provide, in addition to physiological energy transduction, technologically useful piezoelectric material derived entirely from nature. Membrane proteins could extend the range of rationally designed biopiezoelectric materials far beyond the minimalistic peptide motifs currently used in miniaturized energy harvesters, and the finding of robust piezoelectric response in a transmembrane protein also raises fundamental questions regarding the molecular evolution, activation, and role of regulatory proteins in the cellular nanomachinery, indicating that piezoelectricity might be important for fundamental physiological processes.     

Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

Wear and thermal behavior of basalt fiber reinforced rice husk/polyvinyl chloride composites

Plant fiber reinforced polymer composites (PFRPs) in practical application are often subjected to both complex friction and variable temperature environments. The present work explores the possibility of reinforcing rice husk/polyvinyl chloride (RH/PVC) composites with basalt fibers (BF) for developing a new wear resistant material with improved thermal stability. The results showed that the structural strength and wear resistance of the composites increased at first and then decreased with an increasing ratio of BF/RH, the highest value occurred at a BF/RH ratio of 8/42. The thermal stability of composites had a positive relationship with BF/RH ratio. The composites added with BF all possessed improved performance in comparison with unadded composites. Hence, the findings of this article proposed some new perspectives on improving the wear resistance and thermal stability of PFRPs that would broaden their practical application.     

Rubber's dissipated energy quantification used in vibratory insulation and protection systems

In vibratory protection and insulation systems, the major problem consist to choose suitable passive elements (spring, damper, others), which are inserted between the resonator and the exciter which have the role of preventing or reducing the transmission of dynamic forces. This work consists of characterizing a synthetic rubber (SR) sample of hollow circular shape (design requirement) by determining the coefficient of energy dissipation at an average ambient temperature of 20°C with a humidity of 25%. The mechanical load and discharge tests make it possible to draw hysteresis curves through which the dissipation coefficient will be determined, the load values is between 500 and 1000 N, with 30, 60, and 90 mm/min loading speeds and a number of cycles 2, 3, and 5, these values have been chosen so as not to cause the effect of cyclic hardening and softening and also to take into consideration, that the vibration limits movement at 3 cycles, which makes this test different from other tests such as fatigue. The processing of different curves, allows to determine energy dissipation coefficient of rubber specimen and also to examine its variation as a function of load, loading speed, and number of cycles; it is possible to determine other characteristics from this coefficient, such as, damping ratio, dynamic amplification factor, and so on, necessary to study efficiency of protection systems, design, and manufacture, based on the curve of transmissibility of dynamic forces to evaluate performance rubber conditions use.     

Thermodynamic modelling of the ternary Bi-Ga-Te system for potential application in thermoelectric materials

Thermoelectric materials have drawn widespread attention because they can enable the direct conversion between electric and thermal energy. Over the years, different materials such as skutterudites, clathrates, intermetallic alloys, eutectic alloys, chalcogenides have been explored for Thermoelectric (TE) applications. Amongst the eutectic alloys, the Bi-Ga-Te system exhibits promising potential as a TE material. Accordingly, in this study, we performed the thermodynamic optimization and critical evaluation of binary Bi–Ga, Bi–Te, Ga–Te, and ternary Bi-Ga-Te systems using the CALPHAD method. It is observed that the Ga–Te system shows asymmetric liquid solution properties with strong negative enthalpy of mixing, whereas the Bi–Te liquid exhibits the symmetric regular solution behavior. Moreover, the Bi–Ga liquid solution has a positive enthalpy of mixing. Therefore, Modified Quasichemical Model (MQM) using pair approximation was utilized to describe the diversified thermodynamic properties of liquid solution in sub-binaries by taking into account the Short-Range Ordering (SRO). By merging the binary optimization results with a proper interpolation method, the liquid solution properties and phase diagram information in the Bi-Ga-Te ternary system were also reproduced successfully without any adjustable ternary parameter. Several ternary eutectic compositions were suggested for designing TE alloy with enhanced properties using the developed database.     

Ultrathin perovskite based solar cells with the efficiency enhanced by charge transfer process

We report a new approach of improving the solar cells efficiency based on ultrathin perovskite films. We propose the addition of CuPc compound to perovskite active layer for enhanced charge generation and transfer process by charge transfer process between CuPc and perovskite. The performance of the devices with and without addition of CuPc was studied in respect to thickness of the active layer. The thickness was varied by the change of the spin coating speed in the range of 4000, 7000 and 10000 rpm, different concentration of CuPc also been studied. The process of charge carrier recombination, crystallinity and Raman characteristics of the obtained films was studied. The perovskite device with an active layer of MAPbI₃ mixed with CuPc spin coated with the speed of 10000 rpm with thickness of about 150 nm demonstrated the efficiency of 12.7%. The ultrathin mixed perovskite film (10000 rpm perovskite film of 15% CuPc) based device presents 33% thickness and 85% efficiency of common pure perovskite device (4000 rpm pure perovskite film).